调控碳材料的功函数以大幅度提升其电催化氧还原性能

氧的电催化还原反应是燃料电池装置与金属空气电池的阴极反应,具有重大的研究意义.在众多的非铂催化剂中,碳材料因其低廉的价格以及独特的物理化学性质受到了广泛的关注.自从发现氮掺杂的碳纳米阵列具有优异的氧还原活性后,不同类型的氮掺杂的碳也得到了深入研究.例如近年来兴起的由金属有机框架衍生的氮掺杂的碳材料,兼具丰富的氮位点及良好的三维结构.氮的掺杂对碳原子具有电子调控的作用,是其高氧还原活性的根本原因.本文对金属有机框架衍生的氮掺杂的碳材料进行进一步的电子结构的优化,以提升催化性能.功函是电子逸出表面所需的最少的能量,是材料的电子结构性质之一,其对氧还原反应的影响也有报道,早期以理论计算为基础,探究氧气分子在碳材料表面的解离能与氮掺杂的碳的表面功函的关系,后续则采用开尔文探针显微镜,直接测量了不同元素掺杂的碳表面功函,并建立起功函与氧还原动力学的线性关系.本文通过控制碳材料的功函来调节其电子结构.铯是一种经典的给电子物质,通过将电子注入到掺杂材料表面来降低其功函.因此,本文通过CsCO₃与2-甲基咪唑、Zn(NO₃)₂煅烧形成铯修饰的氮掺杂碳.电镜及XRD均观察不到所得材料中铯的存在,证明碳层中无大颗粒团聚的铯物种.EDS元素分布图表明,铯在碳层中呈原子级均匀分布.Raman谱结果表明,碳的G带发生明显的位置偏移,证明其面内电子结构发生了明显的改变.XPS结果证明铯成功与氮原子配位,通过铯氮键将电子注入到碳骨架.UPS则最终显示,经过铯的修饰,碳表面功函从4.25 eV下降到3.6 eV.表面功函的降低有利于氧气分子的解离,也调节OOH^*中间体的吸附,使其吸附的自由能更接近最优值.材料改性后氧还原性能明显提升,起始电位达到0.91 V vs RHE,半波电位达到0.83 V vs RHE,均接近商业Pt/C催化剂.氧还原反应的动力学电流密度随功函的降低而增大,验证了前人的结论.本文提供了一个较为新颖的电子结构调控策略,为设计新的氧还原催化剂提供了新的思路.     

Kinetics of glass transition,crystallization and soft magnetic properties of the Fe76.5Nb3B20Cu0.5 glassy alloys

Journal of Thermal Analysis and Calorimetry - Differential scanning calorimetry was used to investigate the non-isothermal crystallization kinetics of the Fe76.5Nb3B20Cu0.5 glassy alloys. The...     

Calcium Sulfite Solids Activated by Iron for Enhancing As(III) Oxidation in Water

Desulfurized gypsum (DG) as a soil modifier imparts it with bulk solid sulfite. The Fe(III)–sulfite process in the liquid phase has shown great potential for the rapid removal of As(III), but the performance and mechanism of this process using DG as a sulfite source in aqueous solution remains unclear. In this work, employing solid CaSO₃ as a source of SO₃²⁻, we have studied the effects of different conditions (e.g., pH, Fe dosage, sulfite dosage) on As(III) oxidation in the Fe(III)–CaSO₃ system. The results show that 72.1% of As(III) was removed from solution by centrifugal treatment for 60 min at near-neutral pH. Quenching experiments have indicated that oxidation efficiencies of As(III) are due at 67.5% to HO^•, 17.5% to SO₅^•− and 15% to SO₄^•−. This finding may have promising implications in developing a new cost-effective technology for the treatment of arsenic-containing water using DG.     

水溶液法原位构建ZnO亲锂层稳定锂-石榴石电解质界面

固态电池以其高安全性和高能量密度而备受关注。石榴石型固体电解质(LLZO)由于具有较高的离子导电性和对锂金属的稳定性,在固态电池中具有应用前景,但陶瓷与锂金属较差的界面接触会导致高的界面阻抗和可能形成的枝晶穿透。我们利用LLZO表层独特的H⁺/Li⁺交换反应,提出了一种简便有效的金属盐类水溶液诱发策略,在电解质表面原位构建ZnO亲锂层,界面处LiZn合金化实现紧密连续的接触。引入改性层后,界面阻抗可显著降低至约10Ω·cm²,对称电池能够在0.1mA·cm^-2的电流密度下实现长达1000h的长循环稳定性。匹配正极LiFePO₄(LFP)或LiNi_0.5Co_0.2Mn_0.3O₂(NCM523)的准固态电池在室温下能够稳定循环100次以上。     

Nanotechnology for diagnosis and therapy of rheumatoid arthritis: Evolution towards theranostic approaches

Rheumatoid arthritis(RA),as a chronic autoimmune disease,damages the bone and cartilage of patients,and even leads to disability.Therefore,the diagnosis and treatment of RA is particularly important.However,due to the complexity of RA,it is difficult to make effective early diagnosis of RA,which is detrimental to RA treatment.Besides,long-term intake of anti-RA drugs can also cause damage to patients' organs.The emergence of nanotechnology provides the new train of thoughts for the diagnosis and treatment of RA.And the combination of diagnosis and therapy is an ideal method to solve the problem of disease management of RA patients.In this review,we summarize the mechanism and microenvironment of RA,discuss the commonly used diagnostic techniques and therapeutic drugs for RA,and review their advantages and disadvantages.New nanotherapy strategies such as drug-carrying nanoparticles,PTT,PDT are listed,and their applications in RA treatment are also summarized.In addition,multimodal imaging,combined therapy and responsive diagnosis and treatment are also summarized as important contents.At last,we also review typical nanocarriers that can be used in the integration of diagnosis and therapy,and discussed their potential applications in RA theranostics.     

Needle-like cobalt phosphide arrays grown on carbon fiber cloth as a binder-free electrode with enhanced lithium storage performance

Cobalt phosphide(CoP) is a promising anode candidate for lithium-ion batteries(LIBs) due to its high specific capacity and low working potential.However,the poor cycling stability and rate performance,caused by low electrical conductivity and huge volume variation,impede the further practical application of CoP anode materials.Herein,we report an integrated binder-free electrode featuring needle-like CoP arrays grown on carbon fiber cloth(CC) for efficient lithium storage.The as-prepared CoP/CC electrode integrates the advantages of 1 D needle-like CoP arrays for efficient electrolyte wettability and fast cha rge transpo rtation,and 3 D CC substrate for superior mechanical stability,flexibility and high conductivity.As a result,the CoP/CC electrode delivers an initial specific capacity of 1283 mAh/g and initial Coulombic effeciencies of 85.4%,which are much higher than that of conventional CoP electrode.Notably,the Co P/CC electrode shows outstanding cycling performance up to 400 cycles at 0.5 A/cm² and excellent rate performance with a discharge capacity of 549 mAh/g even at 5 A/cm².This work demonstrates the great potential of integrated CoP/CC hybrid as efficient bind-free and freestanding electrode for LIBs and future flexible electronic devices.     

DMAO-activated Rare-earth Metal Catalysts for Styrene and Its Derivative Polymerization

The catalytic performance of rare-earth metal dialkyl complexes in combination with DMAO(dry methylaluminoxane)is explored.In the presence of 60 equivalents of DMAO,the half-sandwich complex(C13H8CH2Ph)Sc(CH2SiMe3)2(THF)(1)is inert for styrene polymerization,but(C5Me4Ph)Sc(CH2C6H4NMe2-o)2(2)converts 18％styrene into syndiotactic polystyrene.Under the same conditions,the constrained-geometry configuration sandium complex(C13H8CH2Py)Sc(CH2SiMe3)2(3a)displays extremely high catalytic activity(＞6420 kg·molSC-1·h-1)and perfect syndiospecific(rrrr＞99％)for styrene polymerization,while its lutetium(3b)and yttrium(3c)analogues are nearly inactive.Although the binary catalytic system 3a/DMAO exhibits very low activity for 4-methoxystyrene polymerization,it is an efficient catalyst for the syndioselective polymerization of other styrene derivatives such as 2-methoxystyrene,4-methylthiostyrene,4-fluorostyrene,4-dimethylhydrosilylstyrene,alkyne-susbstituted styrenes and 4-methylstyrene.In addition,the binary system 3a/DMAO can copolymerize ethylene and styrene to give alternating copolymers with a single glass transition at 80℃and 0.4 MPa ethylene pressures.By increasing styrene feed amount from 20 mmol to 60 mmol,the styrene content slight increases from 48.2 mol％to 53.8 mol％,but the polymerization activity is obviously promoted from 240 kg·molSc-1·h-1 to 532 kg·molSc-1·h-1.     

Comprehensive characterization of natural organic matter by MALDI- and ESI-Fourier transform ion cyclotron resonance mass spectrometry

Natural organic matter (NOM) is a complex and non-uniform mixture of organic compounds which plays an important role in environmental processes. Due to the complexity, it is challenging to obtain fully detailed structural information about NOM. Although Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR-MS) has been demonstrated to be a powerful tool for providing molecular information about NOM, multiple ionization methods are needed for comprehensive characterization of NOM at the molecular level considering the ionizing selectivity of different ionization methods. This paper reports the first use of matrix assisted laser desorption/ionization (MALDI) method coupled with FT-ICR-MS for molecular characterization of NOM within a mass range of 200–800 Da. The mass spectral data obtained by MALDI were systematically compared with data generated by electrospray ionization (ESI). It showed that complementary molecular information about NOM which could not be detected by ESI, were provided by MALDI. More unsaturated and aromatic constituents of NOM with lower O/C ratio (O/C ratio < 0.5) were preferentially ionized in MALDI negative mode, whereas more polar constituents of NOM with higher O/C ratio were preferentially ionized in ESI negative mode. Molecular anions of NOM appearing at even m/z in MALDI negative ion mode were detected. The results show that NOM molecules with aromatic structures, moderate O/C ratio (0.7 > O/C ratio > 0.25) and lower H/C ratio were liable to form molecular anions at even m/z, whereas those with higher H/C ratio are more likely to form deprotonated ions at odd m/z. It is speculated that almost half of the NOM molecules identified by MALDI may be aromatic or condensed aromatic compounds with special groups which are liable to absorb electron from other molecules to generate free radical anions during MALDI ionization.     

The Cu-MOF-199/single-walled carbon nanotubes modified electrode for simultaneous determination of hydroquinone and catechol with extended linear ranges and lower detection limits

A novel electrochemical sensor based on Cu-MOF-199 [Cu-MOF-199 = Cu₃(BTC)₂ (BTC = 1,3,5-benzenetricarboxylicacid)] and SWCNTs (single-walled carbon nanotubes) was fabricated for the simultaneous determination of hydroquinone (HQ) and catechol (CT). The modification procedure was carried out through casting SWCNTs on the bare glassy carbon electrode (GCE) and followed by the electrodeposition of Cu-MOF-199 on the SWCNTs modified electrode. Cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and scanning electron microscopy (SEM) were performed to characterize the electrochemical performance and surface characteristics of the as-prepared sensor. The composite electrode exhibited an excellent electrocatalytic activity with increased electrochemical signals towards the oxidation of HQ and CT, owing to the synergistic effect of SWCNTs and Cu-MOF-199. Under the optimized condition, the linear response range were from 0.1 to 1453 μmol L⁻¹ (R_HQ = 0.9999) for HQ and 0.1–1150 μmol L⁻¹ (R_CT = 0.9990) for CT. The detection limits for HQ and CT were as low as 0.08 and 0.1 μmol L⁻¹, respectively. Moreover, the modified electrode presented the good reproducibility and the excellent anti-interference performance. The analytical performance of the developed sensor for the simultaneous detection of HQ and CT had been evaluated in practical samples with satisfying results.